Blog

Welcome to FLP

We'll Get It Covered
Flexible Lining Product Phone:01594 829297

ClassicBond® Bonding / Contact Adhesive - 2.5 Litres

Availability: In stock

£20.00

Quick Overview

ClassicBond® Contact Adhesive is high strength,solvent based bonding adhesive specifically designed for use in the flat roofing industry. Suitable for bonding ClassicBond® EPDM membrane to both horizontal and vertical surfaces including timber,brickwork,metal,pvc and concrete.

Size: 2.5 Litre Tin
Qty in pack: 1
Coverage: 0.6 Ltr / m2 when applied to both sides
Coverage: 4-6 m2 depending on surface & surface condition
Colour: Opaque yellow
Applied: With a spreader, brush or medium pile roller
ClassicBond Contact Adhesive

More Views

  • ClassicBond Contact Adhesive

Product Attachments

View File Classicbond Installation Manual

You may also be interested in the following product(s)

Firestone Pond Liner & Lake Liner

Firestone Pond Liner & Lake Liner

Price: £0.55

   
ClassicBond® Bonding / Contact Adhesive

ClassicBond® Contact Adhesive is high strength,solvent based bonding adhesive specifically designed for use in the flat roofing industry. Suitable for bonding ClassicBond® EPDM membrane to both horizontal and vertical surfaces including timber,brickwork,metal,pvc and concrete.

Application on Up-stands: Stir well before using. Use a 4" mini roller to apply contact adhesive to both the up-stand and membrane. It is also good practice to secure the roof membrane to the deck with a 100mm width of contact adhesive wherever the membrane changes pitch. This will stop the membrane from lifting due to shrinkage. Ensure that the contact adhesive is touch dry before rolling the membrane onto the substrate/up-stand.

Application Deck: Stir well before using.Using a sheepskin roller apply contact adhesive to both the deck and underside of membrane evenly. Ensure that the contact adhesive is touch dry before rolling the membrane onto the deck. Note It is not possible to re-position the membrane once stuck down using contact adhesive.

Installation Tip: If the bonding adhesive is not allowed to properly dry, gas bubbles or blisters may form under the EPDM membrane sheet.These bubbles / blisters may subside over time though.

Due to flash off, condensation may form on freshly applied adhesive when the ambient temperature is near dew point. If condensation develops,possible surface contamination may occur and the application of adhesive must be discontinued. Allow the surface to dry and when conditions allow,apply a thin fresher coat at a coverage rate that is approximately half of the normal coverage rate when re-adhering a previously coated surface.

Allow approximately 5-20 minutes for the contact adhesive to become touch dry dependant on weather conditions. If the membrane is bonded whilst the contact adhesive is still wet you may notice air bubbles appearing under the membrane. These will disappear within a short period of time due to the rubber membrane being partially breathable.
SKU 170UR3017
g/sm No
Size 2.5 Litres
Width No
Color No
Price Per Tin
Tailored Box Size No

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: ClassicBond® Bonding / Contact Adhesive - 2.5 Litres