Blog

Welcome to FLP

We'll Get It Covered
Flexible Lining Product Phone:01594 829297

Roofing Trims and Outlets

Roofing Trims and Outlets

Flexible Roofing Products offer a range of flat EPDM rubber roofing trims and outlets suitable for both the d.i.y / homeowner or the professional roofing contractor.
  1. ClassicBond Check Kerb Edge Trim

    ClassicBond Check Kerb Edge Trim 2.50m x 100mm High (Black)

    £15.00

    ClassicBond Check Kerb Trim 2.50m length x 100mm high Used For: Used to properly secure the edge of the roof where water does not drain into a gutter. This trim acts as a barrier to water at the edge of the roof. Ideal for both the professional builder and the homeowner, just cut to length required. Corner pieces / edge trims would also be required where an edge trim meets a gutter trim • High quality co-extruded PVC-u • Exact colour match of corners, clips and trim lengths • Complete range of joints and corner accessories • Pre-drilled trims for easy installation • Pre-applied waterproof sealant foam on gutter trim and check kerb • Colour matched Polytops® stainless steel fixings • High stock levels for guaranteed delivery • Much faster installation than metal or gutter wrap system Length: 2.50 metres Height: 100 mm Colour: Black Qty in Pack: 1 plus 6 polypins plus 1 fixing clip Addtional requirement: Corner Trim Learn More
  2. ClassicBond Gutter Trim with Built In Batten

    Gutter Trim with Built In Batten 2.50m x 70mm High (Black)

    £16.50

    Out of stock

    Gutter Trim with Built In Batten 2.50m x 70mm high (Black) - 2 Piece System Ideal for DIY roofers, just cut to length. Don’t forget to buy your pre-fabricated corners. (Where an edge trim meets a gutter trim use edge trim corners). • 1 x 2.5m lengths of pre drilled front trim with sealant foam applied, • 1 x 2.5m lengths of batten replacement back plate, • 1 x Gutter Trim Joiner, • 6 x Polytops® (65mm), • 6 x Stainless steel back plate fixing pins (50mm), This trim doesn’t require batten to be installed to create a step to the gutter. Length: 2.5 Metres Height: 70 mm Colour: Black Qty in Pack: 1 x 2 piece system Additional requirement: Corner trim Ideal for both the professional builder and the homeowner, just cut to length required. Corner pieces / edge trims would also be required where an edge trim meets a gutter trim Learn More
  3. ClassicBond Check Kerb Trim Joiner

    ClassicBond Check Kerb Joiner x 100mm High (Black)

    £2.50

    ClassicBond Check Kerb Joiner x 100mm high Used For: Used to properly secure the edge of the roof where water does not drain into a gutter. This trim acts as a barrier to water at the edge of the roof. Ideal for both the professional builder and the homeowner. Height: 100 mm Colour: Black Learn More
  4. Classicbond gutter trim with standard back plate

    Gutter Trim with Standard Back Plate 2.50m x 70mm High (Black)

    £13.50

    Out of stock

    Gutter Trim with Standard Back Plate 2.50m x 70mm high (Black) - 2 Piece System Ideal for DIY roofers, just cut to length. Don’t forget to buy your pre-fabricated corners. (Where an edge trim meets a gutter trim use edge trim corners). • 1 x 2.5m lengths of pre drilled trim with sealant foam applied, • 1 x 2.5m lengths of standard back plate, • 1 x Gutter Trim Joiner • 6 x Polytops® (50mm) • 6 x Stainless steel back plate fixing pins (30mm) Length: 2.5 Metres Height: 70 mm Colour: Black Qty in Pack: 1 x 2 piece system Additional requirement: Corner trim Ideal for both the professional builder and the homeowner, just cut to length required. Corner pieces / edge trims would also be required where an edge trim meets a gutter trim Learn More
  5. Check Kerb External Corner or Stop End

    Check Kerb External Corner / Stop End (Black)

    £2.50

    Out of stock

    Check Kerb External Corner / Stop End Used For: Used to finish corner of the roof where two edge trims meet on an External Corner Use the end joiners included to form a seal between trims and corners Incorporating pop out blanking plates to enable the corner to be used as an external Check Kerb corners and universal stop end. Fixed by using superglue. Length: 50 mm Height: 100 mm Colour: Black Qty in Pack: 1 Learn More
  6. Check Kerb Internal Corner

    Check Kerb Internal Corner 50mm x 100mm High (Black)

    £2.50

    Check Kerb Internal Corner Used For: Used to finish corner of the roof where two edge trims meet on an INTERNAL Corner Internal Corners for fitting Check Kerb, fixed by using superglue. Length: 50 mm Height: 100 mm Colour: Black Qty in Pack: 1 Learn More
  7. Gutter Trim Internal Corner

    Gutter Trim Internal Corner 30mm x 80mm High (Black)

    £2.50

    Gutter Trim Internal Corner Used For: Used to finish corner of the roof where two gutter trims meet on an INTERNAL Corner The tops of these clip over the gutter trim and are fixed by using superglue Length: 30 mm Height: 80 mm Colour: Black Qty in Pack: Learn More
  8. Gutter Trim External Corner

    Gutter Trim External Corner 30mm x 80mm High (Black)

    £2.50

    Gutter Trim External Corner Used For: Used to finish corner of the roof where two gutter trims meet on an EXTERNAL Corner The tops of these clip over the gutter trim and are fixed by using superglue Length: 40 mm Height: 80 mm Colour: Black Qty in Pack: 1 Learn More

8 Item(s)

per page

Grid  List 

Set Descending Direction