Blog

Welcome to FLP

We'll Get It Covered
Flexible Lining Product Phone:01594 829297

Roofing Contact Adhesive Application Guideline

Roofing Contact Adhesive Application Guideline

Roofing Contact Adhesive Application Guidelines

1. Gently pull back the EPDM rubber membrane on all edges revealing the 150mm untreated strip on ply deck

2. Apply the Contact Adhesive to both the ply deck and the membrane and leave until touch dry

3. Check that both surfaces are touch dry / tacky

4. Roll / push the EPDM roofing membrane back into position

5. Use a small roller to push out any air which may have become trapped between the EPDM rubber and the ply roof deck

6. Repeat steps 1 - 5 on all edges

Ensure that the installer follows the Contact Adhesive manufacturers guidelines very carefully - paying special attention to working temperatures, flash-off, cleaning etc