Blog

Welcome to FLP

We'll Get It Covered
Flexible Lining Product Phone:01594 829297

Rubber Roof Installation - Part 2

Rubber Roof Installation - Part 2

Rubber Roof Installation - Part 2

6.Apply the Water Based Adhesive to the plywood deck leaving approximately 150mm strip around the edge

7.Gently roll the membrane into it's original position. Repeat the steps 5- 7 for all sides

8. Sweep out any trapped air between the rubber membrane and the ply decking

9. Gently pull back the rubber membrane from all edges revealing the 150mm untreated strip

10.Apply the Contact Adhesive to the plywood deck and the membrane and leave to go "touch dry"